How do i get this to work?
Follow the instructions on the readme.
And edit your cfg, my cfg is:
OutGauge Mode 2
OutGauge Delay 5
OutGauge IP 127.0.0.1
OutGauge Port 30000
OutGauge ID 2
Then start LFS and enjoy
I still don't get this..
When i do this, It just keep blinking
Now its just lighting all the time, Can't turn it off, I even delted the files still lighting :/
Read the thread, that problem was answered there iirc.
I dont see the answer, I copied the two files into my LFS map, And setted the .cfg as you told me.
None seem to work
Sorted all my rpm's out and if you cant be bothered sorting out all yours, just copy this out into your g27leds.cfg file.
Quote:# To override default LED configuration for a car,
# create a line like this "rpm_xrt 3500 8000" where
# "xrt" is a car code, first number is when the first
# LEDs should light up and the second number is the redline
# Enable extra debugging info
debug 0
rpm_xfg 3000 8000
rpm_xrt 3000 7500
rpm_uf1 3000 7000
rpm_xrg 3000 7000
rpm_lx4 3000 9000
rpm_lx6 3000 9000
rpm_rb4 3000 7500
rpm_fxo 3000 7500
rpm_rac 3000 7000
rpm_fz5 3000 8000
rpm_ufr 3000 9000
rpm_xfr 3000 8000
rpm_fxr 3000 7500
rpm_xrr 3000 7500
rpm_fzr 3000 8500
rpm_mrt 7000 13000
rpm_fbm 3000 9000
rpm_fox 3000 7500
rpm_f08 3000 9500
rpm_bf1 8000 20000
(2011-12-04 15:56)Lewis Wrote: [ -> ]Sorted all my rpm's out and if you cant be bothered sorting out all yours, just copy this out into your g27leds.cfg file.
Quote:# To override default LED configuration for a car,
# create a line like this "rpm_xrt 3500 8000" where
# "xrt" is a car code, first number is when the first
# LEDs should light up and the second number is the redline
# Enable extra debugging info
debug 0
rpm_xfg 3000 8000
rpm_xrt 3000 7500
rpm_uf1 3000 7000
rpm_xrg 3000 7000
rpm_lx4 3000 9000
rpm_lx6 3000 9000
rpm_rb4 3000 7500
rpm_fxo 3000 7500
rpm_rac 3000 7000
rpm_fz5 3000 8000
rpm_ufr 3000 9000
rpm_xfr 3000 8000
rpm_fxr 3000 7500
rpm_xrr 3000 7500
rpm_fzr 3000 8500
rpm_mrt 7000 13000
rpm_fbm 3000 9000
rpm_fox 3000 7500
rpm_f08 3000 9500
rpm_bf1 8000 20000
Do you have to wrote for every cars to make it work, I wrote for my fz5 as i want it on that car..
rpm_fz5 3000 8000
But as i told i dosent seem to work for me
I have done everything the READ ME says, And edited the cfg. file
But all of the lights is just keep blinking when i start up LFS
You dont have to do it for everyone. It is just set as a default one
Okay but i can't make this work
to bad i can't see my lights anymore now lol
Works fine, thanks for sharing!
(2011-12-05 14:55)ZsoLT Wrote: [ -> ]Works fine, thanks for sharing!
What did you do exactly to make it work?
(2011-12-05 15:31)Rasmus Wrote: [ -> ] (2011-12-05 14:55)ZsoLT Wrote: [ -> ]Works fine, thanks for sharing!
What did you do exactly to make it work?
I didn't do anything special, only what was in the readme. Copied files, and make the .cfg. Nothing more.
I don't know why it isn't work 4 U. Maybe try ask the author.
did you set your outgauge to 30000 in your cfg file ?
(2011-12-05 18:00)Speed Wrote: [ -> ]did you set your outgauge to 30000 in your cfg file ?
Yeaaaah
Working like a charm. Thanks for sharing!