Threaded Mode | Linear Mode

GT4tube · (This post was last modified: 2017-05-18 18:13 by GT4tube.)

My T300 original fan got issues noise. I can repair fan replace.

Where can find get a fan better quality for T300 fan?

-Noctua 60mm (Computer) ??
I can budget 20€ (Amazing quality fan low rpm, less db)

Original fan model: "Chiefly CC 5015S12M" (Fan size is 6x6 cm, 15mm wide)

this guy help but no say show where can buy fan for T300?

My screens: (Opening the case on the T300)
[Image: 59173424a0864-DSC_0364.jpg]

**[6S] Angel** · 2017-05-13, 17:11

You cant really buy a "better" one in terms of quality, they are kinda all the same. I've also disassembled my wheel 3 days ago, took the fan apart, lubricated it, but later on it started doing the same thing as before, the bearings are dead. Just get a normal 60x15mm computer fan.

GT4tube · (This post was last modified: 2017-05-13 18:58 by GT4tube.)

Ok, need computer fan? this 60mm it's computer fan

Noctua NF-A6x25 FLX (15€)
[Image: 514NEhMhI5L._AC_UL320_SR272,320_.jpg]

or
Fander Roxo 6015L 60mm (4€)
[Image: frx3-6015l_1.jpg]

**[TC-R] Adam** · 2017-05-13, 19:00

i am sure any T300 user will be big a fan of this guide

**[TC]►Bez◄** · 2017-05-13, 19:10

If you want quiet and reliable get the Noctua one. Get the cheapo one if you want to replace it again within a year or so.

GT4tube · (This post was last modified: 2017-05-13 20:00 by GT4tube.)

-Fander Roxo 6015L (60x15) - [16,8 dB - 2300rpm] - 4€
-Noctua NF-A6x25 FLX (60x25) - [19,3 dB - 3000rpm] - 15€
-SilentiumPC Zephyr (60x15) - [17.9 dB - 2500rpm] - 2.5€
-Gelid Silent (60x15.5) - [24 dB - 3200rpm] - 4€
-AAB Cooling Fan 6 (60x15) - [22 dB - 2000rpm] - 1.6€

Well pick Noctua. but have 3-pin wire, T300 only 2-pin wire, Should cut/change 3-pin to 2-pin?

Banana4Life · 2017-05-13, 19:57

Course you can get better quality fans, go for noctua. It would probably out last 3 cheap ones while being a better performer.

**[TC] Nathan** · 2017-05-13, 20:09

(2017-05-13 19:00)AdamB Wrote: i am sure any T300 user will be big a fan of this guide

your just blowing hot air

**[6S] Angel** · 2017-05-13, 20:42

Oh, i thought you are only looking for one that is 60x15mm. But i guess you wouldnt have any problem with a 25mm wide one either.

GT4tube · (This post was last modified: 2017-05-14 05:42 by GT4tube.)

i check t300 inside fan can be 25mm wide is fine lol

Owl · 2017-05-14, 10:03

Why didn't you just send it back to Thrustmaster instead of voiding your warranty?

GT4tube · (This post was last modified: 2017-05-14 10:17 by GT4tube.)

Out of warranty last month ago then got big issues fan now! lol. I don't care no need warranty if warranty replace be same orignal fan still is shit. I will buy noctua fan better quality and quiet than original fan thrustmaster.

GT4tube · (This post was last modified: 2017-05-18 16:42 by GT4tube.)

Noctua is here!

[Image: 591dce19c20a6-DSC_0396.jpg]

Done!

Welcome T300 Noctua. xd
Smile

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Steering lock issue with my tx leather edition (t300)	Raphi	2	3,885	2019-11-18 14:02 Last Post: Raphi
	T300 Suddenly Stopped Working	Razz	5	8,179	2017-07-02 13:00 Last Post: Razz
	ETS 2 T300 FFB	Razz	0	4,279	2017-06-13 17:27 Last Post: Razz
	T300 Problem Auto-Center calibrate	GT4tube	4	7,707	2016-05-04 10:17 Last Post: Sam