Threaded Mode | Linear Mode

cheb60 · 2012-03-24, 14:30

Hello users of TC driving one and two Smile

,

I have a qeustion about the shifting with a XFR. I have got a G27 and i just want to shift with my H pattern but it does not work... All other cars works for me so far. But i dont like shifting with the things on the wheel.

Does anybody have a solution for this? I really want to shift with my H pattern on a XFR.

Greetz
Cheb

Lasse · 2012-03-24, 15:06

You can't, its a sequental gearbox in the XFR, which means no h-shifter, after my knowledge.

Didsydude · 2012-03-24, 15:20

Yeah, its sequential shifting only in an XFR.

I'm un-familiar with the G27; But on my G25 you can switch the 'H-Shifter' Between 'H-Mode' and 'Sequential Up-Down Mode'

Then all i need to do is re-bind my 'Shift+ and Shift-' Keys in LFS.

However as i said, i'm not sure if you can do this with the G27.

Hope this helped Cheb,

Dids

cheb60 · 2012-03-24, 15:34

I know but it is impossible for the G27 to change it to sequential... Sad

.. I hope there is a program who can make it a H shifter Biggrin

!

Anyone???

Didsydude and it helped me a lot m8.

**[RDSR] Roba** · 2012-03-24, 15:37

I believe I saw something on the LFS commands stuff, where you can use commands to change car's gearing.. Not sure if it's possible, haven't tried yet.

cheb60 · 2012-03-24, 15:39

I hope that would be possible so i can drive the XFR with H pattern mode Smile

**[RDSR] Roba** · 2012-03-24, 16:30

Watch yourself >>Here<<

Didsydude · 2012-03-24, 16:32

Yeah You could assign your 3rd & 4th to 'Up and Down' gear modes, However there wouldn't be a center spring, so you would have to Push and pull the shifter in order to have a realistic sequential gear change :/

**[RDSR] Roba** · 2012-03-24, 16:38

That's true. Or then get a Joystick and assign it to do it instead of the shifter.

Didsydude · 2012-03-24, 17:14

could be done.. Its totally up to you..

cheb60 · 2012-03-24, 17:30

I have allready put it to the 4th and the 3th gear xD i dont like it. Doesnt feel releastic Sad

McGherkin · 2012-03-25, 14:17

For sequential cars, my wheel automatically binds itself to shift with the paddles and the assignments on the paddles move to the gearstick. It reverts when I get back into a normal car.

However, that's with DFP, so I don't know if that'll work on the G27.

**SO•Audiojack** · 2012-03-25, 15:57

I have in fact assigned my sequential shift buttons to two of the four black buttons on top of the G25 shifter.. Not realistic and probably not the best thing to use but I use sequential shift cars so rarely that it ain't a problem. Also my flappy paddles are mapped as the turning signals.

ZsoLT · 2012-03-25, 16:50

(2012-03-25 14:17)McGherkin Wrote: For sequential cars, my wheel automatically binds itself to shift with the paddles and the assignments on the paddles move to the gearstick. It reverts when I get back into a normal car.

However, that's with DFP, so I don't know if that'll work on the G27.

It works like that on G27.