Threaded Mode | Linear Mode

Stunna · 2013-10-11, 16:18

Hey guys/girls. Recently after I turn my PC off at night time and the next day I turn it on it will have a black screen, and I usually have to unplug the GPU wire from the back of my PC and monitor for it to work, along with the power wire plugged into the monitor. Also sometimes when I unplug the wire that is plugged into the GPU it would reset the monitor resolution to default size.

Now, I already changed the power wire and figured out its not that, nor was it kinked.

Im not sure if this is my monitor finally going or GPU card. (Don't think its the GPU)

**[TC-R] Luke** · (This post was last modified: 2013-10-11 22:57 by Luke.)

I occasionally get this, mainly from force shutting it down or after a windows update, I think I solved it just by flicking the switch on the powerpack.

I beleive it is a GPU issue, may not be receiving enough power. Or it could be the connection between the motherboard, GPU and monitor.

Stunna · 2013-10-21, 14:42

Bump.

**[TC-R] Luke** · 2013-10-21, 20:16

How often does this happen?

Stunna · 2013-10-21, 21:40

The next day I turn my PC on. I have to unplug my power wire in back of the monitor for 30seconds to a minute for it to work properly again.

**[TC-R] Luke** · (This post was last modified: 2013-10-21 22:30 by Luke.)

Have you tried a different monitor like a small tv or something? Just to see whether it is your monitor or not,
When I did some research on it as I had a similar issue a long time a go my GPU just needed a power reset.

This basically drains all the power in the circuit (apart from the bios chip)

You can try this by unplugging everything then press the power button 2-3 times to remove any current from the computer then replug Everthing in and see if that worked.

Its simple and basic but in most cases and in my case it worked fine Smile

If it didn't work and it did the same thing on a different monitor it might be your GPU

Pipa · 2013-10-21, 23:16

What happens when you don't unplug the monitor? Will the monitor work after a certain time?

Stunna · 2013-10-21, 23:20

(2013-10-21 23:16)Pipa Wrote: What happens when you don't unplug the monitor? Will the monitor work after a certain time?

It just stays black. Showing nothing on the screen.

**◄Chuck►** · 2013-10-22, 05:51

Does your mainboard happen to have an on-board video card? Maybe its assuming there is no display attached to the actual video card and switches back to the on-board one.

Stunna · 2013-10-22, 12:13

No onboard graphics card.

Pipa · (This post was last modified: 2013-10-22 15:05 by Pipa.)

What connectors does your cable have (VGA,DVI,HDMI,S-VIDEO) and could you try testing another cable?

Stunna · 2013-10-22, 17:07

I tried changing the VGA cable, lets see if that works.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	G-sync with a non compatible Freesync monitor	Marty_Deslions	3	1,444	2021-07-19 23:42 Last Post: Bez
	multi monitor	bowler	1	2,817	2018-06-25 16:07 Last Post: Carl
	Monitor issues	Dale	1	2,839	2016-11-08 15:13 Last Post: Dale
	Second Monitor - Black Bar	Ash	1	2,660	2016-03-27 03:47 Last Post: Sebas
	Monitor goes black when starting some games	Cola	4	4,056	2014-01-07 17:02 Last Post: SeanProdTV
	Dual Monitor Setup?	Ash	19	16,158	2013-08-20 09:49 Last Post: Ash