Beeping on startup.

[[TC]►Nick◄]

(2012-12-30 21:58)Cola Wrote:  Try running it with just one ram stick in one port at a time.
Check if all cables are properly connected.
Check if your graphics card is a dedicated card in a PCI-E/AGP slot, if it is, try reseating it.
Use an air compressor or something similar to blow all the parts clean of dust (if there is any)

Good luck with it.

One million points to you. One stick did the job. Now running on a claimed 512mb, startup says 256mb.

So a dead RAM stick did this?

---

Now says 512mb again. However it's not starting up into Windows.