Show us your ride!

[Jimmy]

(2016-03-28 16:56)Nathan Wrote:  prob wrong spacers or insufficient threads in the nut or they worked loose

did u check them after 50 miles of first fitting

the funny thing is i have only driving short like 25km since wednessday and 30 min from work last two days

[Dino]

np Jimmy, get rid off your left wheel on the back and you can become a two wheel driving arab in sweden

ask tgoorf_lfs or king_badr for lessons

[Olli]

Jimmy could you repost the picture you are all talking about?

[Jimmy]

(2016-03-28 18:20)Olli Wrote:  Jimmy could you repost the picture you are all talking about?

No

[Tibe [CA]]

Interesting way of doing weight reduction Jimmy.

[SO•Audiojack]

Oohh.. I don't even need the photo to picture this. Those puns though...

[Owl]

Maybe there could have been another problem, perhaps he didn't torque the nuts?

[Borja]

(2016-03-28 21:40)Skoda Wrote:  Maybe there could have been another problem, perhaps he didn't torque the nuts?

(2016-03-28 16:51)Jimmy Wrote:  

(2016-03-28 16:47)Nathan Wrote:  Jimmy are you sure they were torqued?

Yes they where that, still confusing how they could snapped like that

[Owl]

I'm blind Borja, you should know that by now

[[TC-R] Sam]

Jimmy you care too much about what others say It's the Internet, you post stuff on a public site and people will pass comments good or bad and wither you like them or not. As long as you like it, why care what others think? Hence why I don't post my own car in here, I simply do not care what others think

[SO•Audiojack]

Saw the pic (thanks Jimmy!) and to me it looks pretty clearly like a low quality spacer that was made of too weak metal and sheared. I'd have to bet those were a bit cheap...

[Toni]

(2016-03-29 13:33)Audiojack Wrote:  Saw the pic (thanks Jimmy!) and to me it looks pretty clearly like a low quality spacer that was made of too weak metal and sheared. I'd have to bet those were a bit cheap...

Thats what i thought too when he sent me a pic, as before he mounted the wheels, he told me he would need spacers to run them, it was only yesterday when i remember that he used them lol.

But Jim, onto bigger and better things right? Dont let the Hatepost/Shitflinging stop you from doing what you want, even i encounter shittalking IRL with my car when people say id need to crush it. I just reply with a 2 and a half minute speech on why not to do so, and make them quiet

[[6S] Mufflord]

(2016-03-29 13:46)Toni Wrote:  

(2016-03-29 13:33)Audiojack Wrote:  Saw the pic (thanks Jimmy!) and to me it looks pretty clearly like a low quality spacer that was made of too weak metal and sheared. I'd have to bet those were a bit cheap...

Thats what i thought too when he sent me a pic, as before he mounted the wheels, he told me he would need spacers to run them, it was only yesterday when i remember that he used them lol.

But Jim, onto bigger and better things right? Dont let the Hatepost/Shitflinging stop you from doing what you want, even i encounter shittalking IRL with my car when people say id need to crush it. I just reply with a 2 and a half minute speech on why not to do so, and make them quiet

Are you sure they dont go quiet from you boring them out? or perhaps they fell into a coma from contamination of your car?


jk

[Toni]

(2016-03-29 13:55)Mufflord Wrote:  Are you sure they dont go quiet from you boring them out? or perhaps they fell into a coma from contamination of your car?

jk

They usually tend to go quiet cause they dont have anything bad to say about it, as i say the shit things that are obvious in it, and add a "dont care" after them.

[SO•Audiojack]

Interior detailing done. Can't fix broken bits of leather (the drivers seat is the worst) but still looks a lot better.




And I got a set of new summer rims this morning. 225/45/R17.
Going to grab a spare set of new tires in the same size tomorrow...

[SO•Audiojack]

Goodride SV308, in chinese tires we trust. The guy I bought them from had put them under his Ford Fiesta, driven a bit and noticed that they rubbed too much. So I kindly took them from him for 200€.


After that, it was time to make my wheels bleed. For this iron removal process I used my new ValetPro Dragon's Breath.



Hey, the car might look alright after I'm done with it! Don't mind the rust on the doors, I'll fix that as soon as the weather gets better.


Also bought these small stickers for lulz, had to crank the contrast to make them visible since they're currently white on white. I'll probably put them somewhere on the rear side windows.

[[RDSR] Roba]

Nice Save that Financial Mistake sticker for me... (s15)

[SO•Audiojack]

(2016-04-01 16:14)Roba Wrote:  Nice Save that Financial Mistake sticker for me... (s15)

I promise to order you assorted stickers when you finally get it.

[RedJohn]

Crashuuu

Spoiler (Click to View)

[Barney [CA]]

stop crash