Threaded Mode | Linear Mode

**[TC] Dodo** · 2019-08-08, 08:13

So lately, i bought my friend's old Logitech DFGT and it has been working perfectly for the years it has been in active use. It also worked on my usage for a while, until it misscalibrated itself and i couldn't find the reason neither the fix in the web.

It calibrates so it is physically offcentered about +45 degrees, but in the Logitech software (trust me, i have the right one) it is centered. I have reinstalled the drivers, after properly cleaning them from my pc first. Didn't work at all. I also tried to manually calibrate it by turning its drivers off from device management. Also didn't work.

So i hope that someone who has some experience with this specific era of Logitech wheels could assist me somehow. I'm very new to these devices so thought i might ask here for help. Thanks in advance!

**[TC] Kyle** · 2019-08-08, 08:33

This may sound silly, but have you used a different USB port? Try plugging it in when Windows is booted.

Borja · 2019-08-08, 09:10

Yes, try what Kyle has suggested.

Also, what happens if you full turn to both sides? (full left then full right)

**[TC] Dodo** · (This post was last modified: 2019-08-08 12:32 by Dodo.)

I tried your suggestions, didnt really change, but somehow it even got worse.
See the video below

Also when it turns fully to left it makes a wierd clacking sound in the end and when turned to the right side it rumbles.

**[TC]►BP◄** · 2019-08-08, 13:00

I reckon it's broken

Getrag · 2019-08-08, 13:13

When someone has calibration issues its usually the optical encoder, that little thing is fragile and can literaly get split in half during some rly hard pushing your luck ffb vibrations. There are people who fixed their wheel who couldnt even start calibrating just by finding out their optical encoder is a bust(dust or broken piece etc.), usually it happens when wheel gets too strong force feedback to the point the wheel "jumps". Lets hope its optical encoder and nothing more complicated.

**[TC] Dodo** · 2019-08-08, 15:52

Seems like i have to do a surgical operation on it.

GT4tube · (This post was last modified: 2019-08-08 16:57 by GT4tube.)

OOF.. Go remove cable FFB mean (un-connect) try Smile

if work then enjoy without FFB. xd

**[TC] Nathan** · 2019-08-09, 07:58

Had this happen to my G25 occasionally, normally i just unplug it and plug it back in..

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	G29 issue on Logitech Gaming Software..	MyNamesPython	4	6,739	2018-06-09 18:54 Last Post: MyNamesPython
	Logitech G27 Profiler	Owl	0	4,629	2016-12-26 09:51 Last Post: Owl
	Logitech G27 - Not using whole 900	Kyle	7	8,130	2016-09-15 18:02 Last Post: Owl
	Logitech profile problems	Borja	10	11,128	2016-02-13 18:50 Last Post: Borja
	Logitech profiler error	UCMA	0	3,510	2016-01-22 14:09 Last Post: UCMA
	Logitech Profiler won't start up	Warrior	1	7,161	2015-04-11 07:56 Last Post: BMW-gek
	Logitech G27 annoying sound	Angel	14	13,045	2014-11-24 14:34 Last Post: Sam
	Logitech Profiler	Kyle	2	5,281	2014-10-05 16:40 Last Post: Kyle
	Logitech profiler	Jimmy	2	4,331	2014-08-21 13:02 Last Post: Jimmy
	Logitech Profiler	Michiyo	2	3,956	2014-06-17 18:40 Last Post: Bez