Threaded Mode | Linear Mode

RedJohn · 2013-01-20, 02:25

Guys , when i try to log on to My lfs server , it shows "ClientConnect: Connect failed" , i tried to opens ports in my router but still the same .

**[TC]»Pete«** · 2013-01-20, 15:56

Basically Ken, you need to forward a port in your router. Depending on what port your server is set to use (Normally 63392 or 63393), you need to log into your router, navigate to port-forwarding and forward the port using TCP & UDP.

RedJohn · 2013-01-20, 16:16

(2013-01-20 15:56)Lampshade Wrote: Basically Ken, you need to forward a port in your router. Depending on what port your server is set to use (Normally 63392 or 63393), you need to log into your router, navigate to port-forwarding and forward the port using TCP & UDP.

Already Done , but still the same problem.

Cola · 2013-01-20, 16:38

Following this..

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Wheel cannot connect properly	Morreboy	15	9,455	2016-02-14 07:53 Last Post: Barney
	LFS stops working at connect	KaraK	16	15,277	2014-04-01 20:57 Last Post: Frozen
	Connect Speaker to computer	RedJohn	5	4,031	2013-05-17 02:26 Last Post: Pete
	Cannot connect to my LFS Server	Cola	9	16,278	2013-01-13 09:31 Last Post: Fatteeh